Station-Drivers - Aquantia AQC107, AQC108, Firmware Version 3.1.56 - Page 2 - STATION-DRIVERS

Aquantia AQC107, AQC108, Firmware Version 3.1.56

Plus d'informations
il y a 8 mois 2 jours #1208 par rvail
Okay, thanks.
In summary:
Unplug the ethernet cable going to the Aquantia LAN port.
Use "diag -k -p" to first check the existing firmware version.
Use "diag -k -f DellNormalDirtyWake-3.1.56_bdp.clx --phy_flash_bdp" to perform the flash.
Shut down the system, use the PSU rocker switch to turn off power, then press and hold the front case power button for a few seconds.
Flip the PSU power switch back on and reboot Windows.
Go to Device Manager and uninstall the Sources/Aquantia device.
Re-install the Aquantia device driver, and check that it is again present under Network Adapters.
Plug in the ethernet cable.

Connexion ou Créer un compte pour participer à la conversation.

Plus d'informations
il y a 8 mois 2 jours - il y a 8 mois 2 jours #1209 par admin
Yes, it's especially good to reinstall the driver which is by default Aquantia by the last at the end of the update and after restarting the pc 1245

Asrock Z270 Professional, i7 (6700K), 16Go Corsair, SSD960, SSD860/850/840, nVidia GeForce GTX960, Creative SB X-Fi Titanium, Clavier Gskill RVB, Souris Asus Gladius II RGB, Grand tour Enermax Storm, Tapis RGB corsair, Router RT2600 & RT1900, Free Fibre 1Gbs
Dernière édition: il y a 8 mois 2 jours par admin.

Connexion ou Créer un compte pour participer à la conversation.

Plus d'informations
il y a 8 mois 1 jour #1218 par JohnnyFire
i have a AQC111C on my mobo i use the instractions and its bricked



C:\Users\Johnny Fire\Desktop>diag -k -f DellNormalDirtyWake-3.1.56_bdp.clx --phy_flash_bdp
PCI\VEN_1D6A&DEV_11B1&SUBSYS_87721043&REV_02\4&261959&0&00E5: Disabled
1 device(s) disabled.
PCI\VEN_1D6A&DEV_11B1&SUBSYS_87721043&REV_02\4&261959&0&00E5: Enabled
1 device(s) enabled.

FLASH type = Macronix MX25L32
PHY could not be detected!
FLASH type = Macronix MX25L32
Bytes: 0x20000
Bytes: 0x20000
Bytes: 0x40000
Kickstarting MCP
FLASH type = Macronix MX25L32
Error kickstarting (mac = False, phy = True)!



now the ethernet not working when drivers installed has an ! and the firmware ver is 0 0 please help me

Connexion ou Créer un compte pour participer à la conversation.

Plus d'informations
il y a 8 mois 1 jour #1219 par rvail
Look in Windows Device Manager for an Aquantia device under "Sources" & uninstall that device.
Then re-run the Aquantia LAN port driver installation utility.
Latest version: 2.1.16.0
www.station-drivers.com/index.php?option...info&id=3822&lang=en
Then check under Network Adapters, where the Aquantia Network Adapter should have re-appeared.

Connexion ou Créer un compte pour participer à la conversation.

Plus d'informations
il y a 8 mois 1 jour #1220 par JohnnyFire
its not that i already dont everyting i can the ethernet is bricked and need to be reflash somehow please anyone?

Connexion ou Créer un compte pour participer à la conversation.

Plus d'informations
il y a 8 mois 1 jour #1222 par rvail

JohnnyFire écrit: its not that i already dont everyting i can the ethernet is bricked and need to be reflash somehow please anyone?


Don't panic, it's due to a special Aquantia diagnostic device driver which got installed (via "diag -k") before flashing the firmware.
Which should be manually uninstalled in order to regain use of port.
See previous message.

Connexion ou Créer un compte pour participer à la conversation.

Temps de génération de la page : 0.222 secondes