Station-Drivers - Aquantia AQC107, AQC108, Firmware Version 3.1.56 - Page 4 - STATION-DRIVERS

Aquantia AQC107, AQC108, Firmware Version 3.1.56

Plus d'informations
il y a 1 an 1 mois #1232 par JohnnyFire
i talk to the support of Aquantia and told that to me so im screwed

that i taking when i try to flash it
C:\Users\Johnny Fire\Desktop>diag -f DellNormalDirtyWake-3.1.56_bdp.clx --phy_flash_bdp

FLASH type = Macronix MX25L32
PHY could not be detected!
FLASH type = Macronix MX25L32
Bytes: 0x20000
Bytes: 0x20000
Bytes: 0x40000
Kickstarting MCP
FLASH type = Macronix MX25L32
Error kickstarting (mac = False, phy = True)!

i use the -k line the proper driver is installed...when i remove the diag driver and i install the original my device cant start .... when im in diag mode and check my firmware ver i see 0 0 so i guess firmware is corrupted and i need to reflash the original somehow.... the Aquantia support dinied to help because i use external source like from this site to do this.... im pissed

Connexion ou Créer un compte pour participer à la conversation.

Plus d'informations
il y a 1 an 1 mois - il y a 1 an 1 mois #1233 par rvail

JohnnyFire écrit: AQC111C chip


In what hardware is this AQC111C chip located? PCIe card, or built in to the motherboard? Exact brand name?
The next step would be to find someone with the same identical hardware, and persuade them to perform a firmware backup of the original factory firmware. Then use that to re-flash back to factory firmware.
Dernière édition: il y a 1 an 1 mois par rvail.

Connexion ou Créer un compte pour participer à la conversation.

Plus d'informations
il y a 1 an 1 mois #1234 par JohnnyFire
Mobo

Asus Maximus XI Formula Z390
yes i think about that but where i find that person?
well maybe its time to RMA that beauty

Connexion ou Créer un compte pour participer à la conversation.

Plus d'informations
il y a 1 an 1 mois - il y a 1 an 1 mois #1235 par rvail
Did you determine which firmware version was present prior to flashing?
If you asked Asus, maybe they could provide the factory firmware file?
Dernière édition: il y a 1 an 1 mois par rvail.

Connexion ou Créer un compte pour participer à la conversation.

Plus d'informations
il y a 1 an 1 mois - il y a 1 an 1 mois #1236 par JohnnyFire
i post in the asus forums but asus is not the company of the best support we all know it

i cant understand the error here

FLASH type = Macronix MX25L32
PHY could not be detected! (What is not detected????????)
FLASH type = Macronix MX25L32
Bytes: 0x20000
Bytes: 0x20000
Bytes: 0x40000
Kickstarting MCP
FLASH type = Macronix MX25L32
Error kickstarting (mac = False, phy = True)! (and what error is this?????)
Dernière édition: il y a 1 an 1 mois par JohnnyFire.

Connexion ou Créer un compte pour participer à la conversation.

Plus d'informations
il y a 1 an 1 mois - il y a 1 an 1 mois #1237 par admin
here is the progress of the update in detail

19-02-11 03:36:31 Firmware Version = 1.5.58
19-02-11 03:36:32 PHY Firmware Version = 00.00.C0.0. VerStr: Eur-03.02-Candidate6: 2017 Jan 06 15h 13m. Uptime 162 sec
19-02-11 03:36:32 Oprom Version = 0.0.0
19-02-11 03:36:32 MAC Chip ID = 0xc108
19-02-11 03:36:32 MAC Chip REV = 0xb0
19-02-11 03:36:32 MAC Secure Boot Enabled = False
19-02-11 03:36:32 MAC Secure Hash Programmed = False
19-02-11 03:36:32 PHY Chip ID = 0xc108
19-02-11 03:36:32 PHY Chip REV = 0xb0
19-02-11 03:36:32 Vendor ID = 0x1d6a
19-02-11 03:36:32 Device ID = 0xd108
19-02-11 03:36:32 Subsystem Vendor ID = 0x1849
19-02-11 03:36:32 Subsystem Device ID = 0xd108
19-02-11 03:36:32 Max Payload Supported = 512 Bytes
19-02-11 03:36:32 PCIe Link Speed = Gen 3 (8.0 GT/s)
19-02-11 03:36:32 PCIe Link Width = x1
19-02-11 03:36:33 MAC Temperature = 46.754424 celsius
19-02-11 03:36:33 PHY Temperature: 46.5703125 celsius
19-02-11 03:36:33 Ethernet Link Status: Down
19-02-11 03:36:33 System TX: Down | System RX: Down
19-02-11 03:36:42 Kickstarting MCP
19-02-11 03:36:44 Flash update successful.
19-02-11 03:37:50
19-02-11 03:37:50 MAC Address = xxxxxxxxx
19-02-11 03:37:50 Firmware Version = 3.1.56
19-02-11 03:37:51 PHY Firmware Version = 00.00.C0.0. VerStr: Eur-03.06-Candidate1: 2018 Aug 29 14h 04m. Uptime 66 sec
19-02-11 03:37:51 Oprom Version = 3.0.17
19-02-11 03:37:51 MAC Chip ID = 0xc108
19-02-11 03:37:51 MAC Chip REV = 0xb0
19-02-11 03:37:51 MAC Secure Boot Enabled = False
19-02-11 03:37:51 MAC Secure Hash Programmed = False
19-02-11 03:37:51 PHY Chip ID = 0xc108
19-02-11 03:37:51 PHY Chip REV = 0xb0
19-02-11 03:37:51 Vendor ID = 0x1d6a
19-02-11 03:37:51 Device ID = 0xd108
19-02-11 03:37:51 Subsystem Vendor ID = 0x1849
19-02-11 03:37:51 Subsystem Device ID = 0xd108
19-02-11 03:37:51 Max Payload Supported = 512 Bytes
19-02-11 03:37:51 PCIe Link Speed = Gen 3 (8.0 GT/s)
19-02-11 03:37:51 PCIe Link Width = x1
19-02-11 03:37:52 MAC Temperature = 45.965478 celsius
19-02-11 03:37:52 PHY Temperature: 45.71875 celsius
19-02-11 03:37:52 Ethernet Link Status: Down
19-02-11 03:37:52 System TX: Down | System RX: Down


* .log file of diag directory

Asrock Z390 Ultimate, Intel i5 (9600KF), 16Go Corsair RVB, SSD970, SSD960/860/850, nVidia GeForce GTX960, Creative SB X-Fi Titanium, Clavier Corsair RVB, Souris Asus Gladius II RGB, Grand tour Enermax RGB , Tapis RGB corsair, Router RT2600, Free Fibre 1Gbs (Cat 7&8)
Dernière édition: il y a 1 an 1 mois par admin.

Connexion ou Créer un compte pour participer à la conversation.

Temps de génération de la page : 0.221 secondes