Jmicron JMS-583 NVMe/USB 3.1 Controller firmware Version 0.2.1.4
- Shonk
- Hors Ligne
- Best Poster
-
Enregistré
- Messages : 48
- Thanks: 21
Réponse de Shonk sur le sujet Jmicron JMS-583 NVMe/USB 3.1 Controller firmware Version 0.2.1.4
Posted il y a 8 mois 2 semaines #1524
This does seem slightly faster
I have a Phison PU31 with a 480GB Phison E13 + JMS-583 its benchmarking just over 1GB/s read now in aida
I flashed it keeping the stock nvram intact so it still id's as Phison PU31
This one (Its made by Phison then badged by the oem)
www.amazon.co.uk/AXE-512GB-Compact-Portable-SSD/dp/B07VLTCW8B
I have a Phison PU31 with a 480GB Phison E13 + JMS-583 its benchmarking just over 1GB/s read now in aida
I flashed it keeping the stock nvram intact so it still id's as Phison PU31
This one (Its made by Phison then badged by the oem)
www.amazon.co.uk/AXE-512GB-Compact-Portable-SSD/dp/B07VLTCW8B
Last Edit:il y a 8 mois 2 semaines
par Shonk
Dernière édition: il y a 8 mois 2 semaines par Shonk.
Les utilisateur(s) suivant ont remercié: admin
Connexion ou Créer un compte pour participer à la conversation.
- Tom
- Hors Ligne
- Super Utilisateur
-
Enregistré
- Messages : 373
- Thanks: 311
Réponse de Tom sur le sujet Jmicron JMS-583 NVMe/USB 3.1 Controller firmware Version 0.2.1.4
Posted il y a 5 mois 2 semaines #2019
Bringing this topic up again.
I have an Orico TCM2-C3 and downloaded the "new"package "Firmware+i9+Write+Protection+Ver.03+JMS583A3.zip" from here .
After comparing the included "JMS58304.bin", the firmware 0.2.1.4 is exactly the same file which was included in the previous package "JMS583_00.02.01.04_Bus_Power.bin"
The included "ITGZXBF.bin" and "JMS583XBF03.bin" in the "Firmware+i9+Write+Protection+Ver.03+JMS583A3.zip" are the same (binary compare), but is FW v191.01.00.03 for JMS583.
No idea for which devices is FW v191.01.00.03 and what this do.
So where is the FW file 0.2.1.4B except that there is newer FW Update tool included.
Cheers
Tom
I have an Orico TCM2-C3 and downloaded the "new"package "Firmware+i9+Write+Protection+Ver.03+JMS583A3.zip" from here .
After comparing the included "JMS58304.bin", the firmware 0.2.1.4 is exactly the same file which was included in the previous package "JMS583_00.02.01.04_Bus_Power.bin"
The included "ITGZXBF.bin" and "JMS583XBF03.bin" in the "Firmware+i9+Write+Protection+Ver.03+JMS583A3.zip" are the same (binary compare), but is FW v191.01.00.03 for JMS583.
No idea for which devices is FW v191.01.00.03 and what this do.
So where is the FW file 0.2.1.4B except that there is newer FW Update tool included.
Cheers
Tom
par Tom
Connexion ou Créer un compte pour participer à la conversation.
Réponse de admin sur le sujet Jmicron JMS-583 NVMe/USB 3.1 Controller firmware Version 0.2.1.4
Posted il y a 5 mois 2 semaines #2020
Hi Tom,
I renamed the package because it only has the most recent mptool
I renamed the package because it only has the most recent mptool
Configuration
Asus Z790 Pro Art, Intel Cpu I7 14700K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX3060, Alimentation Asus ROG 850W, Samsung SSD 990 Pro, SSD980 Pro, Clavier Roccat Vulkan , Souris Asus, Boitier NZXT H6, HP Creative SB Kratos Free Fibre 10Gb Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.
par admin
Les utilisateur(s) suivant ont remercié: Tom
Connexion ou Créer un compte pour participer à la conversation.
- Shonk
- Hors Ligne
- Best Poster
-
Enregistré
- Messages : 48
- Thanks: 21
Réponse de Shonk sur le sujet Jmicron JMS-583 NVMe/USB 3.1 Controller firmware Version 0.2.1.4
Posted il y a 4 mois 3 semaines #2176
Just to confirm 0.2.1.4C Provided by startech
The updater says its newer and proceeds to update the JMS-583 but the actual payload is identical
I Flashed it then dumped the firmware without the nvram then hex compared it to the old 0.2.1.4 its byte by byte identical to the old one
Infact there is only one byte different after flashing when comparing my dump with my nvam
which i presume is a checksum
If you dump only the payload without the nvram there are no differences
www.station-drivers.com/index.php/en/com...0.2.1.4C/lang,en-gb/
The updater says its newer and proceeds to update the JMS-583 but the actual payload is identical
I Flashed it then dumped the firmware without the nvram then hex compared it to the old 0.2.1.4 its byte by byte identical to the old one
Infact there is only one byte different after flashing when comparing my dump with my nvam
which i presume is a checksum
If you dump only the payload without the nvram there are no differences
www.station-drivers.com/index.php/en/com...0.2.1.4C/lang,en-gb/
par Shonk
Connexion ou Créer un compte pour participer à la conversation.
Réponse de admin sur le sujet Jmicron JMS-583 NVMe/USB 3.1 Controller firmware Version 0.2.1.4
Posted il y a 4 mois 3 semaines #2177
Yes it's a different package that's why I name it -A, -B, -C, .....
Configuration
Asus Z790 Pro Art, Intel Cpu I7 14700K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX3060, Alimentation Asus ROG 850W, Samsung SSD 990 Pro, SSD980 Pro, Clavier Roccat Vulkan , Souris Asus, Boitier NZXT H6, HP Creative SB Kratos Free Fibre 10Gb Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.
par admin
Connexion ou Créer un compte pour participer à la conversation.
Temps de génération de la page : 0.648 secondes